Fire Fuel Tool

Use the Fire Fuel Tool to create a spatial map showing the distribution of fire fuels and burn hazards for a region. Fire fuel mapping can be useful for forest planners, as well as local governments attempting to mitigate fire risks within the rapidly growing forest/urban interface.

You can also write a script to do fire fuel analysis using the FireFuelClassification task.

High fire fuel distributions contain dry or dying plant material, which contains less water, whereas low fire fuel distributions typically consist of lush, green plants.

If fire fuels are located beneath a closed canopy, they may not be detected by the Fire Fuel Tool. The higher greenness values caused by canopy closure automatically reduce the fire risk calculation. Additionally, dry or senescent vegetation indices are only sensitive to the top layer of the vegetation, causing the dry vegetation beneath it to be obscured by the upper layer of green vegetation. As such, dry materials under a closed canopy may not be properly detected.

Fire fuel analysis uses the following vegetation index categories:

Broadband and narrowband greenness, to show the bulk amount of green vegetation.
Canopy water content, to show the water content of the vegetation.
Dry or senescent carbon, to highlight non-photosynthetic vegetation (NPV).

To calculate fire fuel:

From the Toolbox, select Spectral > Vegetation > Fire Fuel Vegetation Analysis. The Fire Fuel Classification dialog appears.
Select an input raster, perform optional spatial and spectral subsetting and/or masking, then click OK.
Select a broadband or narrowband Greenness Index from the drop-down list.
Enter a Minimum Valid Greenness Value to use in the fire fuel calculation. Any values in the image less than the value you specify are masked out in the classification result. This setting, along with a proper mask selection, is useful for areas that contain different terrain types. The default value is 0.
Select a vegetation index from the Canopy Water drop-down list.
Select a vegetation index from the Dry or Senescent Carbon Index drop-down list.
Enter a filename and location for the Output Raster.
Enable the Preview check box to see a preview of the settings before you click OK to process the data. The preview is calculated only on the area in the view and uses the resolution level at which you are viewing the image. See Preview for details on the results. To preview a different area in your image, pan and zoom to the area of interest and re-enable the Preview option.
Enable the Display result check box to display the output in the view when processing is complete. Otherwise, if the check box is disabled, the result can be loaded from the Data Manager.
To reuse these task settings in future ENVI sessions, save them to a file. Click the down arrow and select Save Parameter Values, then specify the location and filename to save to. Note that some parameter types, such as rasters, vectors, and ROIs, will not be saved with the file. To apply the saved task settings, click the down arrow and select Restore Parameter Values, then select the file where you previously stored your settings.
To run the process in the background, click the down arrow and select Run Task in the Background. If an ENVI Server has been set up on the network, the Run Task on remote ENVI Server name is also available. The ENVI Server Job Console will show the progress of the job and will provide a link to display the result when processing is complete. See ENVI Servers for more information.
Click OK.

The classifications are relative to the particular input scene only and cannot be generalized to other areas or other scenes. Field examination is essential to link the classes provided by the tool with the real-world conditions they represent. You cannot compare classes between scenes, as the vegetative variability between scenes could be significant, and the actual classification values may not match. For example, a classification color of green in one scene could represent the same field conditions as a classification color of orange in another.

Fire Fuel Tool

See Also